Bosch ISW BIN1-S135X WLSN INERTIA DETECTOR

The wLSN Inertia Sensor is used for monitoring doors and windows. In addition to an inertia sensor, it has internal reed switches (one on each side) that can be used with an external magnet assembly.

Functions:

Gross or Minor Attack Movement Settings

The wLSN Inertia Sensor has two settings (gross attack or minor attack) each of which has sensitivity adjustments. If the minor attack setting is enabled, you can program four or eight repetitive taps. Use the minor attack setting for sensitive areas. Use the minor attack setting for sensitive areas. If minor attack is disabled, the inertia sensor reacts to only major attack movement. The gross attack movement has four sensitivity settings.

RF Signal Strength Mode

Removing the device cover and pressing the tamper switch four times within 10 seconds of battery installation activates the RF signal strength mode. The LED lights steadily for 5 sec and then begins to flash. A slow flash (approximately 1 sec on, 1 sec off) indicates insufficient signal reception. A rapidly flashing LED (approximately five times as fast as the slow flash) indicates the device is receiving sufficient signal from the wLSN Hub.

Technical Specifications

• Environment: Indoor, dry
• EN50131-1: Environmental Class II
• Relative Humidity: Up to 95%, non-condensing
• Temperature (operating): -10°C to +55°C (+14°F to +131°F